Description of problem:
    The paint is propelled by the spray gun in the form of filament.
     Spider’s web occurs when the filaments are notdissolved in the paint film.
Causes:         

• Use of a cold paint which has thickened.
• Incorrect pressure.
• Very high viscosity.
• Use of the incorrect thinner

Preventive measures:

• Spray at the correct temperature and viscosity.
• Use appropriate thinner.

Remedy: 
    Reduce the air pressure and/or the viscosity until the problem disappears.

Note:
    Some products such as Body Schutz, polyester spray filler or textured paint need
    a special spray gun, which has 3.0 mm nozzle for proper application.